IFM SD9000 Sensor Compressed air meter
IFM SD9000 Sensor Compressed air meter berkualitas Original dan dijamin keasliannya. Kami adalah Distributor IFM di indonesia | IFM adalah merk dagang terkemuka yang telah dipakai hampir di semua pabrik yang ada di Indonesia. Kami siap memenuhi kebutuhan IFM Sensor untuk Anda dengan cepat dengan harga bersaing di seluruh Indonesia.
IFM SD9000 Sensor Feature :
- Precise measurement of flow, consumption and medium temperature
- High accuracy, repeatability and measurement dynamics
- For detecting compressed air in industrial use
- With switching output, analogue output and pulse output
- Clearly visible 4-digit LED display
IFM SD9000 Sensor Compressed Product characteristics |
|---|
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
| Process connection | threaded connection R 1 1/2 DN40 |
| Temperature monitoring |
|---|
| Measuring range [°C] | 0…60 |
| Application |
|---|
| Application | for industrial applications |
| Media | compressed air |
| Note on media | | air quality ISO 8573-1 | | class 141 | | class 344 |
|
| Medium temperature [°C] | 0…60 |
| Pressure rating [bar] | 16 |
| Pressure rating [Mpa] | 1.6 |
Electrical data |
|---|
| Operating voltage [V] | 18…30 DC; (according to EN 50178 SELV/PELV) |
| Current consumption [mA] | < 110 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | 1 |
| IFM SD9000 Inputs / outputs |
|---|
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
| Outputs |
|---|
| Total number of outputs | 2 |
| Output signal | switching signal; analogue signal; pulse signal; IO-Link; (configurable) |
| Electrical design | PNP |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC [V] | 2 |
| Permanent current rating of switching output DC [mA] | 250; (per output) |
| Number of analogue outputs | 1 |
| Analogue current output [mA] | 4…20; (scalable) |
| Max. load [Ω] | 500 |
| Pulse output | consumed quantity meter |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
IFM SD9000 Measuring/setting range |
|---|
| Measuring range | | 20…6835 l/min | 0.3…95.3 m/s | 1.5…410 m³/h |
|
| Display range | | 0…8200 l/min | 0…114.4 m/s | 0…492 m³/h |
|
| Set point SP | | 55…6835 l/min | 0.8…95.3 m/s | 3.5…410 m³/h |
|
| Reset point rP | | 20…6800 l/min | 0.3…94.8 m/s | 1.5…408 m³/h |
|
| Analogue start point ASP | | 0…5125 l/min | 0…71.5 m/s | 0…307.5 m³/h |
|
| Analogue end point AEP | | 1710…6835 l/min | 23.8…95.3 m/s | 102.5…410 m³/h |
|
| In steps of | |
| Volumetric flow quantity monitoring |
|---|
| Pulse value | 0.005…4 000 000 m³ |
| In steps of | 0.001 m³ |
| Pulse length [s] | 0,018…2 |
| IFM SD9000 Temperature monitoring |
|---|
| Measuring range [°C] | 0…60 |
| Display range [°C] | -12…72 |
| Accuracy / deviations |
|---|
| IFM SD9000 Flow monitoring |
|---|
| Repeatability [% of the measured value] | ± 1,5 |
| Accuracy (in the measuring range) | ± (3 % MW + 0,3 % MEW) / ± (6 % MW + 0,6 % MEW); (class 141 / ; class 344; conditions: installation to DIN ISO 2533; installation in pipes: DN40) |
| Temperature monitoring |
|---|
| Accuracy [K] | ± 2; (medium flow in the limit area of the flow measurement range) |
| IFM SD9000 Response times |
|---|
| Flow monitoring |
|---|
| Response time [s] | 0.1; (dAP = 0) |
| Damping for the switching output dAP in steps [s] | 0 – 0,2 – 0,4 – 0,6 – 0,8 – 1 |
| Software / programming |
|---|
| Parameter setting options | Flow monitoring; quantity meter; Preset counter; Temperature monitoring; hysteresis / window; normally open / normally closed; current/pulse output; display can be rotated and switched off; Display unit; totaliser |
| Interfaces |
|---|
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 CDV |
| IO-Link device ID | 269 d / 00 01 0D h |
| Profiles | no profile |
| SIO mode | yes |
| Required master port type | A |
| Process data analogue | 3 |
| Process data binary | 2 |
| Min. process cycle time [ms] | 4.1 |
Operating conditions |
|---|
| Ambient temperature [°C] | 0…60 |
| Storage temperature [°C] | -20…85 |
| Max. relative air humidity [%] | 90 |
| Protection | IP 65 |
| Tests / approvals |
|---|
| EMC | | DIN EN 61000-6-2 | | | DIN EN 61000-6-3 | |
|
| Vibration resistance | | DIN EN 68000-2-6 | 5 g (55…2000 Hz) |
|
| MTTF [years] | 227 |
| Pressure Equipment Directive | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| IFM SD9000 Mechanical data |
|---|
| Weight [g] | 4004 |
| Materials | PBT-GF20; NBR; PC; stainless steel (1.4301 / 304); PTFE; brass coated; aluminium powder-coated |
| Materials (wetted parts) | stainless steel (1.4301 / 304); FKM; ceramics glass passivated; PEEK GF30; polyester; aluminium |
| Process connection | threaded connection R 1 1/2 DN40 |
IFM SD9000 Displays / operating elements |
|---|
| Display | | Display unit | 5 x LED, green (Nl/min, Nm³/h, Nm/s, Nm³, °C) | | function display | 1 x LED, green | | switching status | 2 x LED, yellow | | measured values | alphanumeric display, 4-digit | | programming | alphanumeric display, 4-digit |
|
| Remarks |
|---|
| Remarks | | MW = measured value | | MEW = Final value of the measuring range | | Measuring, display and setting ranges refer to the standard volume flow according to DIN ISO 2533. | | For information about installation and operation please see the operating instructions. |
|
| Pack quantity | 1 pcs. |
| Electrical connection |
|---|
| Connection | |
Pengertian IFM SD9000 Sensor Compressed air meter
Dalam kimia dan sains lainnya, istilah Compressed air meter Atau temperatur dan tekanan standar adalah sebuah keadaan standar yang digunakan dalam pengukuran eksperimen. Standar ini digunakan agar setiap data dalam percobaan yang berbeda-beda dapat dibandingkan. Standar yang paling umum digunakan adalah standar IUPAC dan NIST. Terdapat juga variasi standar lainnya yang ditetapkan oleh organisasi-organisasi lainnya. Standar IUPAC sekarang ini adalah temperatur 0 °C (273,15 K, 32 °F) dan tekanan absolut 100 kPa (14,504 psi),[1] sedangkan standar NIST adalah 20 °C (293,15 K, 68 °F) dan tekanan absolut 101,325 kPa (14,696 psi).
Dalam bidang industri dan komersial, kondisi standar temperatur dan tekanan bisanya perlu disebutkan untuk merujuk pada kondisi referensi standar untuk mengekspresikan volume gas dan cairan dan kuantitas lainnya. Walapun begitu, kebanyakan publikasi teknis hanya menyatakan “kondisi standar” tanpa penjelasan lebih lanjut, sehingga menimbulkan kerancuan dan kesalahan.
Definisi
Definisi lama
Dalam lima sampai enam dasarwasa terakhir, para profesional dan ilmuwan yang menggunakan sistem satuan metrik mendefinisikan kondisi referensi standar temperatur dan tekanan untuk mengekspresikan volume gas sebagai 0 °C (273,15 K) dan 101,325 kPa (1 atm). Sedangkan untuk yang menggunakan saturan Imperial adalah 60 °F (520 °R) dan 14,696 psi (1 atm). Namun kedua definisi di atas tidak lagi digunakan.
Definisi baru
Terdapat beberapa definisi kondisi referensi standar yang sekarang digunakan oleh berbagai organisasi-organisasi di dunia. Beberapa organisasi mempunyai standar yang berbeda pada masa lalu, seperti IUPAC yang mempunyai standar 0 °C dan 100 kPa (1 bar) sejak 1982 dan berbeda dengan standar lama 0 °C dan 101,325 kPa (1 atm).[2] Contoh lainnya pada industri perminyakan, dengan standar lama 60 °F dan 14.696 psi, dan standar baru (terutama di Amerika Utara) 60 °F dan 14,73 psi.
| Kondisi referensi standar |
| Temperatur | Tekanan mutlak | Kelembapan relatif | Organisasi |
| °C | kPa | % RH |
| 0 | 100,000 | | IUPAC (definisi baru)[1] |
| 0 | 101,325 | | IUPAC (definisi lama),[1] NIST,[3] ISO 10780[4] |
| 15 | 101,325 | 0[5][6] | ICAO’s ISA,[5] ISO 13443,[6] EEA,[7] EGIA[8] |
| 20 | 101,325 | | EPA,[9] NIST[10] |
| 25 | 101,325 | | EPA[11] |
| 25 | 100,000 | | SATP[12] |
| 20 | 100,000 | 0 | CAGI[13] |
| 15 | 100,000 | | SPE[14] |
| °F | psi | % RH | |
| 60 | 14,696 | | SPE,[14] U.S. OSHA,[15] SCAQMD[16] |
| 60 | 14,73 | | EGIA,[8] OPEC,[17] U.S. EIA[18] |
| 59 | 14,503 | 78 | U.S. Army Standard Metro[19][20] |
| 59 | 14,696 | 60 | ISO 2314, ISO 3977-2[21] |
| °F | in Hg | % RH | |
| 70 | 29,92 | 0 | AMCA,[22][23] massa jenis udara = 0,075 lbm/ft³. Standar AMCA berlaku hanya untuk udara. |
IFM SD9000 Compressed air meter
| Product designation | Compressed air meter |
|---|
| Application | for industrial applications |
|---|
| Process connection | threaded connection R 1 1/2 DN40 |
|---|
| Operating voltage DC | 18…30 V |
|---|
| Voltage type | DC |
|---|
| Electrical design | PNP |
|---|
| Total number of outputs | 2 |
|---|
| Output function | normally open / normally closed; (parameterisable); analogue |
|---|
| Output signal | switching signal; analogue signal; pulse signal; IO-Link; (configurable) |
|---|
| Analogue current output | 4…20; (scalable) mA |
|---|
| Measuring range | 1.5…410 m³/h |
|---|
| Pressure rating | 16 bar |
|---|
| Connection | M12 Connector |
|---|
| Materials | PBT-GF20; NBR; PC; stainless steel (1.4301 / 304); PTFE; brass coated; aluminium powder-coated |
|---|
| Materials (wetted parts) | stainless steel (1.4301 / 304); FKM; ceramics glass passivated; PEEK GF30; polyester; aluminium |
|---|
| Display | Display unit: 5 x LED green (Nl/min, Nm³/h, Nm/s, Nm³, °C); function display: 1 x LED green; switching status: 2 x LED yellow; measured values: alphanumeric display 4-digit; programming: alphanumeric display 4-digit |
|---|
| Ambient temperature | 0…60 °C |
|---|
| Medium temperature | 0…60 °C |
|---|
| Communication interface | IO-Link |
|---|
| Brand | ifm electronic gmbh or equivalent |
|---|
| Type | SD9000 |
|---|
Type IFM SD9000 lainnya
SD8500
SD2500
SD9500
SD5500
SD6500
SD8000
SD6000
SD0523
SD6050
SD2000
SD8600
SD6600
SD5600
SD6100
SD5000
SD9000
SD5100
SD8100
SD6101
SDG070
SDG207
SD6001
SDG107
SDG087
SD8001
SDG157
SDG152
SDG082
SDG200
SDG201
SDG080
SDG100
SDG150
SD2001
SDG102
SD1540
SD2501
SD8501
SD6601
SD8601
SD5800
SD6800
Produk IFM SD9000 yang kami jual adalah barang baru dan bergaransi resmi, silahkan Hubungi Tim marketing kami yang siap membantu untuk info lebih lanjut dan juga untuk mengetahui info harga dan stok dari IFM SD9000 atau Pesan sekarang untuk cepat memenuhi kebutuhan Sensor IFM di perusahaan anda. Kami Distributor IFM Sensor Indonesia dan banyak IFM controller Sensor Untuk informasi lebih lanjut silahkan hubungi Sales Marketing kami.
Datasheet Katalog IFM SD9000
