Jual HMI V9060iTD Hakko Fuji Electric Monitouch
Kami PT. ADINATA JAYA TEKNIK menjual HMI V9060iTD Hakko Fuji Electric Monitouch
V9 Advanced Lineup
V9101iW series
V9071iW series
V9 Standard Lineup
V9120iS series
V9100iS series
V9080iS series
V9 Lite Lineup
V9100iC series
V9080iC series
V9060iT series
HMI Hakko V9060iTD Dimensions and Part Names
| V9060iTD | ||
|---|---|---|
| V9060iTD Power supply | Rated voltage | DC24V |
| Permissible range of voltage | ±10％ | |
| Permissible momentary power failure | within 1ms | |
| Demand (maximum rating) | 13W or less | |
| Insulation resistance | DC500V 10MΩ or more | |
| V9060iTD Physical environment | Ambient temperature | 0～50℃*1 |
| Ambient humidity | 85%RH or less (without dew condensation)*1 | |
| Operation altitude | 2,000 meters or lower | |
| Atmosphere | Not to be exposed to corrosive gas, or conductive dust | |
| Storage temperature | -10～60℃*1 | |
| Storage temperature | 85%RH or less (without dew condensation)*1 | |
| Overvoltage category | Category II | |
| Pollution degree | Pollution degree 2 | |
| V9060iTD Mechanical operating conditions | Resistance to oscillation | Complies with JIS B 3502 (IEC61131-2) Vibration frequency: 5～9Hz, pulsating with:3.5mm, 9～150Hz, Acceleration: 9.8m/s2(1G),X,Y,Z: 3 directions (10 times each) |
| Resistance to shock | Complies with JIS B 3502 (IEC61131-2) Peak acceleration: 147m/s2(15G), X,Y,Z: 3 directions, three times each (18 times in total) | |
| Electric operating conditions | Resistance to noise | Noise voltage: 1,000Vp-p, pulse width: 1μs, pulse rise time: 1ns |
| Resistance to static discharge | Complies with IEC61000-4-2, contact: 6kV, air: 8kV | |
| V9060iTD Installation conditions | Grounding | Grounding resistance: Less than 100Ω, FG/SG separation |
| Structure | Protection structure: Front case: IP66, Type 4X/13(when water-proof gasket is used), Rear case: IP20, single unit, installation method: panel mounting | |
| Cooling system | Natural air cooling | |
| Dimensions W*H*D(mm) | 182.5×138.8×53.0 | |
| Dimensions W*H*D(mm) | 174.0×131.0（+0.5/-0） | |
| Case color | Light gray (black front housing for black model) | |
| Material | PC resin | |
- *1: Use at a wet-bulb temperature of 39°C or less because higher temperatures may cause failure.
HMI Hakko V9060iT Performance Specifications
| Screen memory (FROM) | 64MB | |
|---|---|---|
| Backup memory (SRAM) | 800KB | |
| V9060iTD Display | Display device | TFT color LCD |
| Resolution | 640×480 | |
| Display size | 5.7″ | |
| Colors | 260 thousand *2 | |
| Backlight | LED | |
| Backlight life | 50,000 hours | |
| Touch switch | Type | Analog resistance film |
| Function switch | Quantity | 6 |
| V9060iTD External interface | D-Sub 9-pin (CN1)*3 | RS-232C, RS-485(two-wire system), RS-422(four-wire system), Asynchronous type, Data length: 7,8 bits, Parity: even, odd, none, Stop bit: 1, 2 bits, Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200 bps |
| Modular 8-pin (MJ1/ MJ2) | RS-232C, RS-485(two-wire system), RS-422(four-wire system)*4 , Asynchronous type, Data length: 7,8 bits, Parity: even, odd, none, Stop bit: 1, 2 bits, Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200, 187500*5 bps | |
| SD card | One card slot provided as standard | |
| Ethernet | 1ch, Baud rate: 100Mbps, 10Mbps | |
| Wireless LAN | – | |
| USB | Type A、Type mini-B(Ver.2.0) | |
| Sound output | – | |
| V9060iTD Clock | Backup period | 5 years (Ambient temperature 25°C) |
| Calendar accuracy | Gap ±90 sec. per month (Ambient temperature 25°C, when power is not supplied) | |
| V9060iTD Standard | CE marking | EN61000-6-2, EN61000-6-4, EN50581 |
| UL･cUL | UL61010-1、UL61010-2-201*6 、ANSI/ISA 12.12.01 | |
| KC *7 | Compliant | |
| Radio Act | – | |
| V9060iTD Classification Standard | Nippon Kaiji Kyokai (NK) American Bureau of Shipping (ABS) Lloyd’s Register of Shipping (LR) Det Norske Veritas (DNV) |
- *2: For displaying pictures, 3D parts,video, and RGB input (excluding high-speed mode) only. Other parts are displayed in 65,536 colors.
- *3: Optional unit (DUR-00) is required for the V9071iW and V9060iTD.
- *4: 187,500 bps (four-wire system) for the V9071iW and V9060iTD MJ2 only.
- *5: Only for Siemens MPI (Incompatible with DUR-00).
- *6: Only for Hardware Ver. f or later. Applicable standard for Hardware Ver. a to e is UL 508.
- *7: Black model not certified
pesan sekarang!
Setiap kode tipe HMI Hakko memberikan informasi tentang spesifikasi dan fitur-fitur yang dimiliki oleh HMI tersebut. Penting untuk memahami kode tipe HMI Hakko untuk memilih HMI yang sesuai dengan kebutuhan aplikasi Anda. Sebagai distributor HMI Hakko terpercaya, kami menyediakan berbagai tipe HMI Hakko dengan dukungan teknis yang handal. Hubungi kami sekarang untuk mendapatkan informasi lebih lanjut tentang tipe-tipe HMI Hakko yang tersedia. Hubungi Kami Sekarang!