Jual HMI V9120iS Hakko Fuji Electric Monitouch
Kami PT. ADINATA JAYA TEKNIK menjual HMI V9120iS Hakko Fuji Electric Monitouch.
V9 Advanced Lineup
V9101iW series
V9071iW series
V9 Standard Lineup
V9120iS series
V9100iS series
V9080iS series
V9 Lite Lineup
V9100iC series
V9080iC series
V9060iT series
HMI Hakko V9120iS Dimensions and Part Names
| V9120iS | ||
|---|---|---|
| V9120iS Power supply | Rated voltage | 100-240V AC/ 24V DC |
| Permissible range of voltage | AC: -15%, +10%/ DC: ±10% | |
| Permissible momentary power failure | AC within 20ms, DC within 1ms | |
| Demand (maximum rating) | AC: 70VA or less/ DC: 28W or less | |
| Insulation resistance | DC500V 10MΩ or more | |
| V9120iS Physical environment | Ambient temperature | 0～50℃ *1 |
| Ambient humidity | 85%RH or less (without dew condensation) *1 | |
| Operation altitude | 2,000 meters or lower | |
| Atmosphere | Not to be exposed to corrosive gas, or conductive dust | |
| Storage temperature | -10～60℃ *1 | |
| Storage humidity | 85%RH or less (without dew condensation) *1 | |
| Overvoltage category | Category II | |
| Pollution degree | Pollution degree 2 | |
| V9120iS Mechanical operating conditions | Resistance to oscillation | Complies with JIS B 3502 (IEC61131-2) Vibration frequency: 5-9Hz, pulsating with:3.5mm, 9-150Hz, Acceleration: 9.8m/s2(1G),X,Y,Z: 3 directions (10 times each) |
| Resistance to shock | Complies with JIS B 3502 (IEC61131-2) Peak acceleration: 147m/s2(15G), X,Y,Z: 3 directions, three times each (18 times in total) | |
| V9120iS Electric operating conditions | Resistance to noise | Noise voltage: 1,500Vp-p, pulse width: 1μs, pulse rise time: 1ns |
| Resistance to static discharge | Complies with IEC61000-4-2, contact: 6kV, air: 8kV | |
| V9120iS Installation conditions | Grounding | Grounding resistance: Less than 100Ω, FG/SG separation |
| Structure | Protection structure: Front case: IP66, Type 4X/13 *2(when water-proof gasket is used), Rear case: IP20, single unit, installation method: panel mounting | |
| Cooling system | Natural air cooling | |
| Dimensions W*H*D(mm) | 327.8×261.0×54.9 | |
| Panel cutout (mm) | 313.0×246.2（+0.5/-0） | |
| Case color | Light gray (black front housing for black model) | |
| Material | PC resin | |
- *1: Use at a wet-bulb temperature of 39°C or less because higher temperatures may cause failure.
HMI Hakko V9120iS Performance Specifications
| V9120iS Screen memory (FROM) | 64MB | |
|---|---|---|
| Backup memory (SRAM) | 800KB | |
| V9120iS Display | Display device | TFT color LCD |
| Resolution | 800×600 | |
| Display size | 12.1″ | |
| Colors | 16.7 million *3 | |
| Backlight | LED | |
| Backlight life | 70,000 hours | |
| Touch switch | Type | Analog resistance film |
| Function switch | Quantity | 8 |
| V9120iS External interface | D-Sub 9-pin (CN1) | RS-232C/ RS-485(2-wire system)/ RS-422(4-wire system), Asynchronous type, Data length: 7,8 bits, Parity: even, odd, none, Stop bit: 1, 2 bits, Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200, 187500*4 bps |
| Modular 8-pin （MJ1/MJ2） | RS-232C/ RS-485(2-wire system), Asynchronous type, Data length: 7,8 bits, Parity: even, odd, none, Stop bit: 1, 2 bits, Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200 bps | |
| SD card | One card slot provided as standard | |
| Ethernet | 1ch, Baud rate: 100Mbps, 10Mbps | |
| Wireless LAN *5 | Complies with IEEE802.11b/g/n (2.4GHz) | |
| USB | Type A,Type mini-B(Ver.2.0) | |
| Sound output | 1ch provided as standard | |
| V9120iS Clock | Backup period | 5 years (Ambient temperature 25°C) |
| Calendar accuracy | Gap ±90 sec. per month (Ambient temperature 25°C, when power is not supplied) | |
| V9120iS Standard | CE marking *6 | EN61000-6-2,EN61000-6-4,EN50581 *8 |
| UL･cUL *6 | UL61010-1、UL61010-2-201*7 、ANSI/ISA 12.12.01 *2 | |
| KC *8*9 | Compliant | |
| Radio Act *5 | Japan: TELEC | |
| Classification Standard *2*8 | Nippon Kaiji Kyokai (NK) American Bureau of Shipping (ABS) Lloyd’s Register of Shipping (LR) Det Norske Veritas (DNV) |
- *2: DC products only. Hardware of Ver. b or later.
- *3: For displaying pictures, 3D parts,video, and RGB input (excluding high-speed mode) only. Other parts are displayed in 65,536 colors.
- *4: Only for Siemens MPI (Incompatible with DUR-00).
- *5: Wireless LAN-compatible products only.
- *6: DC products only.
- *7: Only for Hardware Ver. f or later. Applicable standard for Hardware Ver. a to e is UL 508.
- *8: Wireless LAN compatible products are not supported.
- *9: Black model not certified.
pesan sekarang!
Setiap kode tipe HMI Hakko memberikan informasi tentang spesifikasi dan fitur-fitur yang dimiliki oleh HMI tersebut. Penting untuk memahami kode tipe HMI Hakko untuk memilih HMI yang sesuai dengan kebutuhan aplikasi Anda. Sebagai distributor HMI Hakko terpercaya, kami menyediakan berbagai tipe HMI Hakko dengan dukungan teknis yang handal. Hubungi kami sekarang untuk mendapatkan informasi lebih lanjut tentang tipe-tipe HMI Hakko yang tersedia. Hubungi Kami Sekarang!