Yaskawa Sigma Trac II
Kami menjual Yaskawa Sigma Trac II berkualitas Original dan dijamin keasliannya. Yaskawa adalah merk dagang terkemuka yang telah dipakai hampir di semua pabrik yang ada di Indonesia. Kami siap memenuhi kebutuhan Servo & Drive Yaskawa untuk Anda dengan cepat dengan harga bersaing di seluruh Indonesia.
Turnkey linear stages, built-to-order and fully tested. Bolt it down, connect it up, and enjoy world class linear moton immediately.
Turnkey linear stages, built to order and fully tested
Need precise, high speed and repeatable linear motion, without the time-consuming process of designing your own linear stages? Use Yaskawa’s motion engineering expertise to spare your overworked engineers the effort of specifying, designing and sourcing components, assembly jigs, and test equipment. Our expertly designed, manufactured, and tested mechatronic solutions give your machine a faster time to market and your engineering team more time to innovate.
Yaskawa Sigma Trac II Highlights
Sigma Trac II is a complete linear motion solution. Each component in Sigma Trac II
is fully assembled and tested:
- Coil and magnets
- Bearings
- Programming without main power through embedded USB port.
- Encoder
- Cables
- Cable management
- Optional bellows
- Optional X-Y mounting kit
Simply provide a flat mounting surface and bolt on your payload.
Improve Machine Performance
- Minimize cycle times and maximize productivity with speeds up to 5m/s, and peak force output up to 5040 N.
Repeatability
- Coupling the load directly to the motor and encoder yields positioning repeatability of ±2µm.
Zero Maintenance
- Integrated bearing lubrication technology for long-term maintenance-free operation.
Reliability
- We’ve eliminate gears, belts, and screws, resulting in a 10 million double-stroke design life.
Absolute Encoder Feedback
- Absolute encoder feedback simplifies wiring and requires no homing routines, even after removing power from the equipment.
Wide Range of Sizes
- With 6 motor sizes and 24 base lengths, there is a linear stage solution for nearly any application. All are available for use with 100/200V or 400V power.
Cable Management
- Carefully controlling cable flex maximizes cable life. Use additional space in the cable carrier for cables and hoses to your payload.
Bellows
- Optional bellows protect magnets and encoder scale from dust, loose debris, and the occasional dropped tool.
Balanced Thrust
- Yaw accuracy is optimized by centering the coil, balancing the thrust equally between the bearings.
X-Y Mounting Kit
- An available X-Y mounting kit simplifies design and installation of 2-axis Cartesian systems for pick and place, machining, and additive manufacturing operations.
Yaskawa Sigma Trac II Specifications
| Linear Stage Model ST2F- | A1A | A2A | A3A | A1D | A2D | A3D | |
| Mounted Linear Motor SGLFW2- | 30A070 | 30A120 | 30A230 | 30D070 | 30D120 | 30D230 | |
| Time Rating | Continuous | ||||||
| Thermal Class | B | ||||||
| Insulation Resistance | 500 VDC, 10 MΩ min. | ||||||
| Withstand Voltage | 1,500 VAC for 1 minute | 1,800 VAC for 1 minute | |||||
| Excitation | Permanent Magnet | ||||||
| Cooling Method | Self-cooled | ||||||
| Protective Structure | IP00 | ||||||
| Environmental Conditions | Surrounding Air Temperature | 0°C to 40°C (with no freezing) | |||||
| Surrounding Air Humidity | 20% to 80% relative humidity (with no condensation) | ||||||
| Installation Site |
| ||||||
| Shock Resistance | Impact Acceleration Rate | 196 m/s2 | |||||
| Number of Impacts | 2 times | ||||||
| Vibration Resistance | Vibration Acceleration Rate | 49 m/s2 (vertical, side-to-side, and front-to-back) | |||||
| Linear Stage Model ST2F- | C1A | C2A | C3A | C1D | C2D | C3D | |
| Mounted Linear Motor SGLFW2- | 90A200 | 90A380 | 90A560 | 90D200 | 90D380 | 90D560 | |
| Time Rating | Continuous | ||||||
| Thermal Class | B | ||||||
| Insulation Resistance | 500 VDC, 10 MΩ min. | ||||||
| Withstand Voltage | 1,500 VAC for 1 minute | 1,800 VAC for 1 minute | |||||
| Excitation | Permanent Magnet | ||||||
| Cooling Method | Self-cooled | ||||||
| Protective Structure | IP00 | ||||||
| Environmental Conditions | Surrounding Air Temperature | 0°C to 40°C (with no freezing) | |||||
| Surrounding Air Humidity | 20% to 80% relative humidity (with no condensation) | ||||||
| Installation Site |
| ||||||
| Shock Resistance | Impact Acceleration Rate | 196 m/s2 | |||||
| Number of Impacts | 2 times | ||||||
| Vibration Resistance | Vibration Acceleration Rate | 49 m/s2 (vertical, side-to-side, and front-to-back) | |||||
Yaskawa Sigma Trac II Models & Ratings
| Linear Stage Model ST2F- | A1A | A2A | A3A | A1D | A2D | A3D | ||
| Mounted Linear Motor SGLFW2- | 30A070 | 30A120 | 30A230 | 30D070 | 30D120 | 30D230 | ||
| Power Supply | V | 100V / 200V | 100V / 200V | 100V / 200V | 400V | 400V | 400V | |
| Rated Speed1 | m/s | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | |
| Maximum Speed1 | m/s | 5.0 | 5.0 | 5.0 | 5.0 | 5.0 | 5.0 | |
| Rated Force1,2 | N | 45 | 90 | 180 | 170 | 45 | 90 | 180 |
| Maximum Force1 | N | 135 | 270 | 540 | 500 | 135 | 270 | 540 |
| Force Constant | N/Arms | 33.3 | 64.5 | 64.5 | 33.3 | 64.5 | 129.0 | |
| Motor Constant | N/√W | 11.3 | 17.3 | 24.4 | 11.3 | 17.3 | 24.4 | |
| Magnetic Attraction | N | 200 | 630 | 1260 | 200 | 630 | 1260 | |
| Maximum Payload | kg | 3.7 | 6.4 | 30.2 | 16.2 | 3.7 | 6.4 | 30.2 |
| Maximum Payload (with dynamic brake resistor) | kg | 3.7 | 8.0 | 30.2 | 16.2 | 3.7 | 8.0 | 30.2 |
| Moving Mass | kg | 2.4 | 3.9 | 5.5 | 2.4 | 3.9 | 5.5 | |
| Applicable SERVOPACK | SGD7S- SGD7W | 1R6A, 2R1F | 1R6A, 2R1F | 3R8A | 2R8A, 2R8F | 1R9D | 1R9D | 1R9D |
| 1R6A | 1R6A | – | 2R8A, 2R8F | 2R6D | 2R6D | 2R6D | ||
| Repeatability3 | μm | +-2 | ||||||
- 1These values are for operation in combination with a SERVOPACK when the temperature of the armature winding is 100°C. The values for the other items are at 20°C. These are typical values.
- 2The rated forces are the continuous allowable force values at a surrounding air temperature of 40°C with an aluminum heat sink of the following dimensions:
- 150 mm x 100 mm x 10 mm: ST2F-A1A and ST2F-A1D
- 254 mm x 254 mm x 25 mm: ST2F-A2A, ST2F-A2D, ST2F-A3A, and ST2F-A3D
- 400 mm x 500 mm x 25 mm: ST2F-C1A and ST2F-C1D
- 609 mm x 762 mm x 40 mm: ST2F-C2A and ST2F-C2D
- 900 mm x 762 mm x 40 mm: ST2F-C3A and ST2F-C3D
- 3Units are assembled and tested fully restrained on a granite surface with a maximum surface accuracy of 15μm at 70°F. Performance of the installed unit may vary with mounting surface quality and temperature.
Servo & Drives Yaskawa Lainnya
